Home › Surprise, AZ › Batt & Blown-In Insulation
Surprise, AZ · ROC #345515

Batt and blown-in insulation in Surprise, for a city built mostly since 2000.

The median Surprise home went up in 2005, and more than half were built in the 2000s alone. That shapes the work: loose-fill blown over finished attics, and batts fitted in new walls and ceilings.

AZ ROC #345515 Milgard® Certified Dealer Since 2005 Our Own Crews, No Subs
Free Quote

Free top-up estimate

How big is the house, and when was it built? We'll measure the attic free and say whether a top-up makes sense.

  • Attic depth measured first
  • Top-ups over your existing layer
  • CertainTeed, Owens Corning, Johns Manville
  • No subcontractors on the job
  • Builder bids within 48 hours
Request a Free Quote →
Prefer to talk? (480) 339-0036
100K+ Homes Completed
20+ Years in Business
ROC 345515 AZ Licensed
Own Crews No Subcontractors
Two kinds of job

Attic top-ups and new-wall batts

Picture two houses. One is a 2005 home off Bell Road with the builder's original attic layer. The other is still framed, with no drywall yet. The first gets blown-in loose-fill over what's there. The second gets batts between studs and joists. Either way, the target R-value decides how deep we go; R-value is how well insulation slows heat.

Blown-in insulation being added to an attic

Blown-in for finished attics

Loose-fill is blown across the attic floor in an even layer, reaching the gaps around wiring and joists without pulling anything out.

Batts for open framing

While studs are still open, we set fiberglass batts from CertainTeed or Owens Corning, or Johns Manville mineral wool, in walls and ceilings.

Zone 2 targets

For a bare zone 2 attic, ENERGY STAR's number is R49. With 3 to 4 inches already down, it suggests adding R38.

Depth before price

Before any price, we check how deep and what kind the current layer is. The gap to your target decides the top-up.

Products

What goes into your attic or walls

Our crews install fiberglass batts, mineral wool batts and blown-in loose-fill. Want the roof deck sealed instead? See spray foam insulation, or start with our attic insulation overview.

  • Blown-in loose-fill for attic floors
  • Top-ups over the builder's layer
  • Owens Corning fiberglass batts
  • Mineral wool batts by Johns Manville
  • CertainTeed batts for walls
  • Ceiling batts in new homes
  • Batts sized to your target R-value
  • Insulation packages for builders

Questions About Your Project?

Call us or send the details online. We follow up within one business day.

Call (480) 339-0036 Request a Quote Online
Local homes

Surprise homes and what they need

APS homes, no SRP rebate

Surprise is APS territory, so SRP's attic rebate isn't open to homes here. The case for a top-up rests on what we measure in your attic.

Where the attics are

Most of the city's homes, and so most of its attics, are in 85374 (38%), 85379 (28%) and 85388 (17%). We book attic visits in all three, plus 85378 and 85387.

New homes and builders

For builders, we fit batts in walls while the framing is open and insulate the attic with batts or blown-in loose-fill. One crew covers both.

Why Vezina

Why our crews for batts and blown-in

No subcontractors

Every installer in your attic or on your site is a Vezina employee, working under our AZ ROC #345515 license.

Quick follow-up

Every quote request gets a reply within one business day, and the attic check that comes first costs you nothing.

Ready for builders

Builders get a named project manager per community, plus post-close warranty service. One call to us, and Vezina handles it.

One contract

Add replacement windows or patio doors to the same job. One crew and one contact then cover the whole house.

FAQs: Surprise Batt & Blown-In

Questions about batts and blown-in

Blown-in or batts for an existing attic?

In a finished attic, we usually blow in loose-fill, since it fills around wires, pipes and joists without tearing anything out. Open framing, like a new wall, is where batts come in.

My house was built in 2005. Does it need a top-up?

It might. An attic that age may still hold only the builder's layer. If we find 3 to 4 inches, ENERGY STAR suggests adding R38. We measure first, so the quote covers only the depth you're missing.

How thick will the new layer be?

Each product packs a different R-value into an inch. Loose-fill fiberglass gives about R-2.2 to R-2.7, and fiberglass batts give about R-2.9 to R-3.8, so the same goal can mean different depths.

Do you insulate new homes for builders in Surprise?

Yes, from a single house to a 500-unit community, with a detailed bid within 48 hours of plans. Windows and doors can go on the same contract as the insulation.

Mineral wool or fiberglass batts?

Both fit between studs and joists. We install fiberglass batts from CertainTeed and Owens Corning, plus mineral wool batts from Johns Manville. Tell us what you're building, and we'll walk through the choice with you.

Can you top up an attic in Sun City Grand?

Yes. We work in Sun City Grand, Arizona Traditions, Surprise Farms, Sierra Montana and the rest of the city. Each top-up starts with a free look at the attic.

Surprise, AZ · ROC #345515

Get a batt or blown-in quote in Surprise

Give us the square footage, the build year and your part of town. A free in-home visit covers the attic check, and our reply comes within one business day.

(480) 339-0036
  • Attic depth measured first
  • Top-ups over your existing layer
  • CertainTeed, Owens Corning, Johns Manville
  • No subcontractors on the job
  • Builder bids within 48 hours

Phoenix office
7310 W Roosevelt St, Ste A12
Phoenix, AZ 85043
Mon-Fri, 7:00 AM to 5:00 PM

Add depth to a 2000s attic

We measure for free and reply within one business day.

Get a Free Quote Call (480) 339-0036